Two Whistler Blackcomb employees were injured while performing routine lift maintenance on the Whistler Mountain T-Bars Monday.
One of the employees fell approximately six metres from a lift tower to the ground, according to a release from Whistler Blackcomb. His injuries are not life threatening, although he was air-lifted to Vancouver for a full examination.
The other employee suffered minor bruises as he was harnessed to the tower, and did not fall.
The accident happened near noon. The T-Bars have been closed to the public since May, however routine maintenance on the lift takes place throughout the summer in advance of the winter season.
According to Whistler Blackcomb, early investigations indicate that one employee remained harnessed to the tower when the lift was given the go-ahead to start moving. The movement of the lift caused the work carrier hanger to torque and snap, sending the carrier and the unharnessed employee to the ground.
The incident has been reported to Worksafe BC, and to the BC Safety Authority which regulates passenger ropeways throughout the province. A full investigation is underway to understand the cause of the incident, but there is no indication that safety or lift equipment failed.
Lift Maintenance staff spend approximately 50,000 hours annually on preventative lift maintenance across a system of 38 lifts on both mountains. The Whistler Blackcomb release stated: "an employee incident of this kind is highly unusual as Whistler Blackcomb's Lift Maintenance employees are some of the most experienced and well-trained in the ski industry. Upon further understanding of the results of the investigation, a full debrief will take place with staff to ensure learning from this very unfortunate incident.
"Our thoughts and best wishes are with our two employees for their speedy recovery."
April 27, 2017, 1:02 AM
Agreement lays out key issues to be explored by local parties More...
April 27, 2017, 1:01 AM
Rise in violence against nurses speaks to health authorities' inaction, says union More...
April 27, 2017, 1:00 AM
'Nobody seems to have thought about looking in the macro channel, where there's a lot more space' More...